11.28.2006

Tree Monster Tree Props

I haven't gotten too much done in the last week, with Thanksgiving and then a weekend stomach virus for my wife, ugh.....but I have done a little :)

I've been branch hunting, these in the pic came from my mother-in-laws yard on Thanksgiving day....my favorite is the small one in the middle, its hole looks so much like Woody's....I want Woody to look natural to his environment so here's my plan for the other trees on set....I've made a few liquid rubber latex skins using the tree monster mold, made copies of the root system from the sculpt to paste onto real branches that I pick up in the yard....with a little clay for spackle and a new paintjob, they should work out nicely.....
I'm also starting to think about magnets for my tiny lumberjacks, so that I don't have to work a tie-down into their teensy feet.....I think it might just work with such small puppets.....not that I've started making them yet :)

11.20.2006

Tree Beast Test Clip



Beast Piece QT on Vimeo

....trying vimeo this time, like Shelley uses in Halfland :)

It Ain't Easy Bein' Green

Close-ups as ordered :) Thanks to everyone for the kudos and comments and encouragement....I've added a layer of green (too much I think), and a little dark blue in the shadowy areas, and now I think I want to go over the whole thing with an even lighter grey in some places.....still need to figure in and figure out vines and teeth (or maybe not?) and tiny men but I might do some animation tests later today anyway...I made some little makeshift armature-wire man-legs to give you all a sense of scale.....










Buuuuuuuuuuuuuuuuurrrrrrrrrrrrrp!!!


EDIT: my first test clip is done and posted at vimeo, I'm going to try to embed it later but for now here's the link :D http://www.vimeo.com/clip:118313

11.19.2006

Tree Beast Paintjob, In Progress

I spent some time tonight paintin' up the Beast....I mixed Prosaide and acrylic paint, about 50/50...started with a thin layer of medium brown....


I want to thank my wife Julianna for being my archival shutterbug through this whole process :)

Next I hit all of the crevices and nooks and crannies with a dark brown, almost black, and then drybrushed the whole thing with a light grey....its coming along but still not quite where I want it....gonna add some green tomorrow, dust him, and then maybe do an animation test or two :D


11.18.2006

Twiggy Plugs for the Tree Monster


A quick post about tonight's progress.....liquid rubber latex works fantastically on the foam latex, I used it to patch a few of the air-bubble-pores and to implant the Beast's twiggy hair plugs....I'm still working out the best way to do the teeth....as of now he is primed and ready to be painted....

11.17.2006

My First Foam Latex Run

I still can't believe it actually happened :D

It didnt rain......the foam didnt gel in the bowl....the toaster oven didnt fizzle out....objects weren't ruined by flying foamy spray...it all went well......some might say, too well :)

The day started perfectly, beautiful weather, sunny but cool.....I got out of bed and first thing, signed online and checked the humidity and temp in my zip code.....actually, no, that's wrong....the FIRST thing I did was watch Regis & Kelly, to see a few holiday puppets in action, armatured by buddy Sven Bonnichsen at the Scarlet Letters, you can watch the clip here...THEN I checked the weather online....perfect conditions.....I hadn't gotten a chance to set up, so I cleaned my area of the kitchen by the slidey glass doors, got all my supplies ready, set up the fan & scale & mixer & foamcore splash guard, and headed outside to set up the toaster oven....unfortunately for me, during the summer months, wasps had nested in the frame of the door all along the track at the top....no problem, I fetched my bottle of Raid and went to war.....but you know what really sucks?......when your bottle of Raid runs out halfway through extermination of a colony of wasps...they don't like being exterminated, it turns out...........I ran......went to the store for a new can and then showed them who's boss :P then I had to hose down and scrub the door to get rid of the poison, and knock down the nests.....after my wife got home from work, we had dinner and Smallville, and THEN I got to work....The day started at 54* with 54% humidity.....almost ideal.....but by the time I got to mixing, it was 49* with 74% humidity......from these numbers, I ultimately decided to go with the exact measurements laid out by GM.....normally you would offset the cold temp by adding more gelling agent, and you would offset the high humidity by using less gelling agent, so I figured they would balance out....

Single Batch = 150g latex base, 30g foaming agent, 15g curing agent, & 14g gelling agent

Mixed in a Sunbeam Mixmaster, small bowl (I had virtually no splatter!!), following the guidelines for a 'normal temperature' room (68-74*)...again, I did a little averaging with the temp as well.....the thermostat in my house was set at 75*, but the table/splashguard/fan was set up in the back doorway with the door open, so I figured the actual temp would be a little cooler....

Here's my schedule:
9:33pm, speed 1, 1 minute--I constantly scraped the side of the bowl with my rubber spatula, throughout the entire mixing process
9:34pm, speed 6, 6 minutes--here you'll start to notice the foam fluffing up
9:40pm, speed 4, 3 minutes
9:43pm, speed 1, 3 minutes
9:46pm, speed 1, 1.5 minutes, added gelling agent slowly, drizzling around the edge of the bowl

Then I quickly brushed the foam latex batter into the mold halves (which had already been coated with mold release) and poured enough into each half to fill it.....these minutes were extremely tense, I was expecting gelled foam at any second but it didn't happen....I smooshed the halves of the mold together, spewing foam out the sides and everywhere, making a mess....I put way too much foam in there :)

I had to wire the halves together because I forgot to get me some mold-straps, then I let it sit to gel, which happened almost immediatley.....I'm telling you, if I had dallied for another 30 seconds somewhere, it would've been a failure....I let it sit for about 10 minutes anyway, peeled off the excess that had dripped around the mold, and waited until the foam left in the bowl was completely gelled....uncured (uncooked) gelled foam has a strange consistency, foam without the springiness....dents stay pushed in....
I went outside and turned on the toaster oven, set to 200*....recommended temp is around 185* but since the oven was outside in 50* weather, I turned it up a little and cooked it a little longer.....Tree Monster went into the oven at 10:00 and cooked until 1:00 am....

More coming soon, I'm eager to go seam :)

Foam Test #1......Success!!

Mmmmmm.....concrete sandwich with latex spread.....my favorite bedtime snack........


The day was beautiful, perfect for foamy tests.....after a prolonged battle with wasps, I finally got everything set up and started mixing at about 9pm....and now.........I've got a somewhat-seamed, fully cast, foam latex Tree Monster puppet!!!!!....far from a perfect casting, there are small air bubbles in the surface, but I'm fairly certain they will be nigh-invisible after the paintjob.....I'm very very excited :D Can't wait to get home from work tomorrow evening and continue seaming, can't wait to paint, can't wait to animate, can't wait to post more......til tomorrow, when I can be more in depth, here are a few pics.....

WOO-HOO!!!!!!!!!!!!!!!!!

In the pic above you can see the effect of the mold wall, which created a very thin membrane around the puppet, making for very easy seaming.....more coming soon :)

11.15.2006

Tree Mold, completed

After resculpting bits of the beast, I rolled out a few pieces of water clay, about 1/4" thick, and laid them onto the mold around the sculpt....then I trimmed the edge of this new clay bed around the sculpt, creating a trench about 1/4" wide....I also trimmed around the mold's keys...the rest of the clay will stay in the mold while the second half sets, ultimately creating open empty space for the foam latex overflow as I squish the two halves together in casting....I sprayed the whole thing down with Clearcoat, rubbed vaseline on any exposed ultracal, and repeated the drizzle-burlap-superlayer process...once the new half set, about two hours later, I pressed a sculpting tool into one of the squishy clay sides, digging out enough water clay to pry open the mold....Woody's 'root system' made it difficult to separate the halves, and the sculpt did not survive the mold-making process, but they usually don't.....the dark green you see in the pic is the floral tape I wrapped the armature with, to keep it clean during sculpting....next, I carefully peeled out as much of the dead sculpt as I could, and then even more carefully went at it with my sculpting tools, digging tiny shreds of clay out of the barky texturing....using a soft brush and a little alcohol, I washed away the residual clay....I noticed pretty quickly that the second half, covering the back of the sculpt, has several air bubbles, a few right on the surface of the sculpt...I may try to fill them or I may just let him have a few worts or I may do surgery after casting, not sure yet....you can see a couple of the bubbles clearly by the 'Hellboy' swirly on the elbow in the pic below, and you can see what I had to deal with as far as clay-cleanup....

I did a little armature surgery, trimming the nubs that remained from the two limbs I decided to sever early in the sculpting process, and also adding a tie-down rectally....I just blobbed on a bit more epoxy clay, I had plenty of extra space in the root area....tomorrow I clean up and set up for Foamy Thursday....

...and I'm realizing that.....I am a control freak...........yes, its true.....I never would have guessed......I'm not concerned with seaming, or painting the puppet, or animating it....but I'm fairly stressed about the casting, the mixing of the foamy batter which can be so easily influenced by weather/humidity.....things I have no control over.....I think this might be another little side effect of the storm, a little personality shift towards obsessive-compulsiveness?

11.13.2006

Tree Monster Molded, the long version Part 2

As the first layers set up, I mixed another small soupy batch, drenched a piece of burlap with it, then spread the shloopy burlap on top of the developing mold....this will help give the mold added strength, which it needs....plus I'm a butterfingers, should I drop it and it break, the burlap layer will sort of help keep it intact or at least partially fixable....I drizzled more ultracal on top of the burlap layer, making sure to press it down and smooth it out enough to eliminate airbubbles...when this layer started to set, I mixed up an ultrathick soft-clay-like wad of ultracal to create the 'super layer'....then I evened up the sides, smoothed the top a bit, and let it sit...so far I've liked this method of buildup, though I had a little trouble building up a flat surface on top of the mold...Nick H molds his puppets in a standing position, which I'd like to try...I have to say, though, that I think I prefer working within a box, which would've been built around the sculpt after the water clay wall, using wood or bricks or cinder blocks...makes it much easier to build up the sides of the top of the mold, create an even flat surface across the top instead of a curved surface, which is what I have.....it sits flat, doesn't rock, so it isnt a problem, just doesn't look as nice and probably isn't as strong....ok, first side is done, let it set about 2 hours (occasionally and gleefully feeling the heat emanating from it as it set up, like an oven baking holiday cookies :)....once hard, I peeled the whole thing off of the wood plank, flipped it over, and began to carefully remove the water clay wall to reveal the back half of the sculpt, which I noticed was a bit flattened from laying down...after removing the water clay, I cleaned the residue off of the mold and sculpt using a soft brush and a little water, and then resculpted and touched up the back of the Tree Beast....still more to come :)
......and...hey.............pssssssssst.......come 'ere......got a secret..........Thursday, this thursday, should be my first day of foam latex trials and tribulations :D :o 8O



11.12.2006

Tree Monster Molded, the long version Part 1

When I decided I was happy with the sculpt, just after doing the lighting tests, I removed the twiggy bits, and put the Tree Monster in the fridge for a few hours....I measured the toaster oven again, and discovered that my original measurements were off, I hadn't considered that the back of the oven is curved, and I had measured its widest depth....which meant I had to take about an inch off of the imagined mold, which is how I ended up with such a small amount of space around the sculpt's edges...once I had the measurements down, I drew a box on a plank of wood to represent the maximum dimensions of the mold, so I wouldn't make it too large for the oven....then I got to work on the clay wall...I untie-downed the beast, laid him on his back, replaced the tie-down screws (6-32) to register the armature in the mold, and started building up the white clay, water-based stuff that is pleasantly soft and squishy and cold....very nice...I built it up about halfway, trying to go with the flow of the sculpt....the seams will sort of follow the shape of the roots, for example, and not just cut straight across the top of the 'foot'...after I cleaned up the water clay a bit, pressing it between 'fingers' and whatnot, I smoothed it out and added two small keys to register the mold....I sprayed the whole thing down with a nice layer of clearcoat, then I mixed up my first batch of Utracal, to about the consistency of pea soup...I used a soft brush to drizzle the mixture over the sculpt, lightly brushing in places to make sure the crevices were being filled...I continually drop-tapped the wood plank to make air bubbles rise...as the surface began to set, I would drizzle another layer, gradually thicker as the ultracal in the bowl began to harden....more coming soon :)

11.10.2006

Tree Monster Molded!! (the short version)

I call this the short version 'cause I've got to get to bed soon, I've been working on the monster all day and had to post something...but watch for a longer more detailed post in a few days...In short it went well, this is my first time using Ultracal which was nice to work with, also my first keyed and registered mold, mostly professional, following techniques used by Kathi in that great dvd I mentioned a month or so ago...I 've got a lot of cleaning to do with the mold, ole Woody came out in shreds when the mold came apart and there's tiny bits of clay in all those lovely barky textured crevices....gonna clean 'er up and post again soon, a full report, complete with mold size-issues and bubbles....but for now.........


...there's only about a half inch of Ultracal from the end of the longest root to the edge of the mold, which makes me nervous, but I had to restrict the size due to the dimensions of my toaster oven...hopefully, with the foam-overflow areas in the mold to release some pressure, there won't be a problem.....


....notice the yellow clay remnants of the Tree Monster strewn about the tabletop....ugh.....Jenny 2's mold-removal mini-death is gonna be painful when the time comes...

11.09.2006

Nola Visits Youtube......temporarily.....(she feels so dirty :)

http://youtube.com/watch?v=kbsFRRQ_QuA

....a quick fix 'til later, when there's more brain power to devote....I'm still half asleep....sorry to build so much anticipation over such a tiny clip :P

A Surprise Visit from Nola

I felt like animating today :P, had about 2.5 hours to do this before work, quick and dirty....Nola has been feeling neglected and I absolutely need to rectify that situation soon....2007 is all about the Jenny film...fewer distractions, more focus....the pier set is high on my list of priorities, after my foam tests...

This little clip is sort of what I have in mind for that 'Nola's Bad Day' series I've mentioned a few times, a string of short mishaps for poor unfortunate Nola...I've got sketches for about a dozen of them, obviously with more time and care spent than on this clip here.....I have a feeling, tho, that brief as this clip may be, her fans will be happy to see her alive and kickin' :)

11.08.2006

Tree Monster - lighting tests

No animation here, just me trying out some camera angles and lighting with the sculpt...I like what I see, can't wait to paint him up....started playing with color in the last bits here, but I think I'll go for more of a red-clay-brown-earthy scheme for the final puppet...I haven't even thought about what kind of set I want for this guys tests, probably layered painted backdrops, sort of 2 1/2-D :) but right now I'm focused on foam latex...tomorrow I remove the hair stems, untie him, finish up the underneath area, and Thursday I mold....looks like next week is foamy, fingers crossed....
**the music here is a segment of the I,Robot score by Marco Beltrami, whose Hellboy score is one of my favorites**

11.07.2006

Tree Monster Complete


The sculpt is done! I'm about to get to work on some lighting tests, not animated, just regular ole video with me moving the lights around some to make sure everything looks good with Woody here :)......I'll be posting that in a few hours....then Thursday, my next day off, will be molding day..... Posted by Picasa

11.02.2006

Tree Monster, back-rooty


I started fleshing out the back-roots a bit, I'd say I've got a solid two hours of work left, scheduled for Friday afternoon :) Posted by Picasa